Find Suction Cup Camera Mount at Amazon
|
Security cameras may be as problematic or simplistic to use and install as you make them. Let’s explore a few of the most mutual troubles affiliated with surveillance cameras and how to quickly solve them. My Security Camera Lens Won’t Focus The most mutual fault that is seen when mounting a lens to a CS mount camera is forgetting to remove the C mount adapter ring. When you buy a CS/C mount camera it will in general come with an adapter ring to concede a C mount lens to be used. If this ring is still present on the camera when you mount your CS lens; you will not be capable to focus your camera due to it is disability to get close sufficient to the CCD imager. Simply put; remove the ring. My Bullet Style Security Camera Is Fogging Up When this happens it is in general due to moisture getting into the inside glass covering of the security camera. A quick possible fix for this is to use a little Rain-Ex on the inside and outside of your glass covering. To be competent to get into your glass covering just make sure to remove your sunshield (if applicable), unscrew the end cap (keep track of the O-ring), and apply the Rain-Ex to the glass. Make sure you do this in a cooler area with low humidity to make sure you get the best possible effect. Security Camera Video Interference & Tearing If you have installed your surveillance cameras only to find you have a distorted or tearing image; you may have what is known as ground loop interference. This is a hard circumstance to anticipate, but a rather simple fix. We won’t go into the technical details of what is happening, but suffice it to say you are getting interference amidst your power and video signal. To solve this you need to invest in a ground loop isolator like the 15-GL01 to remainder out this interference and fix your video. Quick Security Camera Mounting Solutions Ever necessitated to mount your security camera someplace where drilling a hole or screwing in a mount isn’t feasible? A few types of mounts to keep in mind for respective surfaces include magnetic mounts, sticker mounts, or suction cup mounts. A magnetic mount is just as it sounds and provides a magnetic connection to your camera. This will help you install a security camera onto a number of metal surfaces. A sticker mount uses a double sided sticker to secure your camera to surfaces such as glass. These mounts distinctively may only hold lower weight surveillance cameras. A suction cup mount is made principally for mounting cameras to vehicular glass applications. These mounts may only hold lower weight security cameras up to in regards to 3 pounds. Most helpful customer reviews 148 of 148 people found the following review helpful. When I got the Panavise 809 from Amazon, my first reaction to it was amazement at how heavily it was constructed, and how well all the individual parts did their job. Since getting it, I’ve made a number of videos using it, and one video showing it in use. It holds the camera very steadily, is very easy to set up, and is EASILY worth the price at Amazon. Recommended 52 of 53 people found the following review helpful. This mount should be excellent for situations where there is no vibration and no need to pan or otherwise modify the camera settings or view during exposure, but seems useless from a moving vehicle unless it’s moving very slowly on smooth pavement. ———- IMPORTANT UPDATE ———– I just noticed a few recent reviews that mentioned they received a knock-off, rather than a genuine Panavise 809. After studying the Panavise picture on this page very closely, I see that my unit is not a genuine Panavise 809, either. (There is no manufacturer or product ID on my unit or on the packaging, so I have no idea who manufactured it or what its true model name is.) I purchased my unit from Vangoddy through amazon.com. Perhaps that explains why so many other reviews are so good (especially the video review left by Thomas which shows, though at slow speed, how good his unit works) and my results are so bad — and I mean BAAAD, truly unusable. There is no comparison between the results I obtained and those that Thomas showed in his video. 19 of 19 people found the following review helpful. I bought it hoping that I could use it on the fairly steeply raked windshield of a late model Civic to film driving routes with my digital camera. Even though I have a low profile “ultracompact” digital camera, there was not enough room between the windshield and the mount to allow me to mount the camera – unless I mounted it upside down, which I obviously could not do because of the inability to rotate the resulting movie. FORTUNATELY I discovered that the Civic has a flat non-porous ( i.e. plastic ) top gauge cover, and was able to mount it on that. But the vast majority of cars have curved top gauge covers, so I don’t think this will be suitable for any but a few car models for the purpose I’m using it for. If Panavise could come up with the same assembly and a U – shaped holder for mounting a camera with a standard tripod screw thread from the bottom, BELOW the mount – now that would be far more useful. |
More solid than expected
Too much vibration
Excellent, but not for off-label use
